We recently acquired a large inventory of overstock items, these items are in the manufacturer's original packaging, but may have minor cosmetic blemishes from storage, (See Photos).

Exact Product Code: This is the Exalto 223BD 12V marine windshield wiper motor cataloged under part number EX2165.32-55.
Parking Configuration: Factory-configured as STBD Park, meaning the wiper blade will automatically cycle and rest on the Starboard (Right) side of the glass when turned off.
Installation Placement: Labeled for a Port Install, meaning it is designed to mount on the left-side (Port) window so the blade rests vertically along the center windshield post, keeping your primary line of sight clear.
Bulkhead Fitment: The .32 segment of the part number specifies that the dual drive spindles are optimized exclusively for structural panels or hull walls measuring up to 35mm (1-3/8") thick.
Factory Sweep Configuration: The -55 suffix indicates that the internal drive link is pre-set from the manufacturer to deliver a precise 55-degree wiping arc.
Drive Setup: Built with a dual-shaft configuration engineered specifically to push and pull a parallel pantograph marine wiper arm assembly.
Electrical Supply: Operates on a standard 12 Volt DC shipboard electrical grid configuration.
Operating Amperage: Draws a steady continuous load of 3 Amps when active and must be paired with an inline 6 Amp slow-blow fuse to protect the internal winding against starting spikes.
Torque Capacity: Produces a high-performance output of 23 Nm to prevent stalling or skipping during heavy rain, high winds, or thick saltwater spray.
Dual-Speed Adjustments: Includes internal wiring for two operating speeds, providing a low-speed cruising setting of 38 sweeps per minute and a high-speed clearing setting of 59 sweeps per minute.
Clearing Limits: Delivers enough torque to safely sweep Exalto Type 1 pantograph arms stretching up to 29.5 inches (750 mm) and heavy-duty wiper blades up to 29.5 inches (750 mm).
Build Quality: Features a fully enclosed, corrosion-resistant aluminum body paired with marine-grade 316 stainless steel drive shafts to survive long-term exposure to harsh saltwater environments.