We recently acquired a large inventory of overstock items, these items are in the manufacturer's original packaging, but may have minor cosmetic blemishes from storage, (See Photos).

Equipment Type: Non-automatic submersible electric marine bilge pump.

Model Identification: Cataloged officially by Xylem under Rule Model 10 (often designated as the Rule 2000 GPH).

Flow Rate Capacity: Delivers an open-flow output of 2,000 Gallons Per Hour (GPH) or 7,570 Liters Per Hour (LPH).

Operating Voltage: Engineered exclusively for a standard 12 Volt DC shipboard electrical grid.

Current Amperage Draw: Draws 8.4 Amps at a base 12.0V configuration, rising up to 12.0 Amps under peak 13.6V system charge.

Recommended Fuse Size: Requires a 15 Amp fuse installed inline for proper electrical overcurrent safety.

Discharge Port Outlet Size: Features a built-in 1-1/8 inch (28.6 mm) hose barb discharge diameter.

Outer Housing Material: Formed from a tough, high-impact ABS thermoplastic structural blend.

Internal Drive Shaft Material: Equipped with a rugged, rust-resistant 316 stainless steel drive shaft.

Physical Dimensions: Measures exactly 6 inches (152 mm) in height and 4-1/4 inches (108 mm) in base diameter.

Electrical Wiring: Outfitted with specialized marine-grade water-blocked and sealed wiring leads to stop moisture from wicking into the motor housing.

Safety Certifications: Certified compliant under global marine manufacturing protocols including CE, NMMA Type Accepted, and IMCI (ISO 8849) standards.

Safety Engineering: Features an integrated Thermal Cut-Off (TCO) mechanism and a fully ignition-protected exterior profile to isolate potential sparks.

Run-Dry Capability: Designed with heavy-duty internal cooling structures that allow the motor frame to run dry for short periods without suffering immediate thermal burnout.

Impeller Architecture: Built around a vibration-free, high-efficiency centrifugal impeller paired with an anti-airlock vented housing.

System Maintenance: Outfitted with an easy-to-clean, snap-lock strainer base that enables swift tool-free removal for clearing debris and rinsing the pump